Microcement Bathrooms in Boca Raton & South Florida
Seamless, waterproof, and completely groutless. D&S Contractors Group applies microcement directly over your existing tile, so you get a brand new bathroom without the demolition, the dust, or the price of a full tear-out.
Shower refresh from about $3,000 with no demo neededWhat Is Microcement?
Microcement is a thin, cement-based decorative coating that is troweled by hand onto walls, floors, ceilings, and showers in layers roughly 2 to 3 millimeters thick. Once sealed, it forms one continuous surface with no grout lines and no joints. Because it is so thin, it can go directly over existing tile, drywall, or concrete, which makes it one of the fastest ways to renovate a bathroom without demolition.
The system we install is a next-generation micro-coating engineered specifically for wet areas. It goes on as a complete system: a bonding primer, a reinforcing mesh, multiple base and finish coats, and a protective sealer rated for showers. That sealer is what turns microcement into a seamless waterproof bathroom coating, fully protected against water and easy to wipe clean.
The result looks like a single piece of hand-finished stone wrapping the room, with soft tonal movement, a matte or satin finish, and colors ranging from warm sand and greige to cool concrete grey.
- Thickness
- About 2 to 3 mm in total
- Surfaces
- Walls, floors, ceilings, and shower enclosures
- Goes Over
- Existing tile, drywall, or concrete
- Grout Lines
- None
The Advantages of a Microcement Bathroom
Microcement solves the two biggest complaints South Florida homeowners have about their bathrooms: the cost and mess of remodeling, and the endless scrubbing of grout.
No Demolition Required
We apply microcement right over your existing tile, so there is no tear-out, no dumpster in the driveway, and no weeks of dust drifting through the house. Your old tile becomes the foundation for the new surface.
Zero Grout Lines
Grout is porous, it stains, and in our humidity it is where mold and mildew take hold. A microcement bathroom has no grout at all, so there is nothing to trap moisture and nothing to scrub with a toothbrush.
Built for Wet Areas
The coating system is engineered for showers and sealed with a wet-area topcoat. Once cured, water beads on the surface instead of soaking in, which is exactly what a South Florida bathroom needs.
One Surface, Every Plane
Microcement flows continuously from the floor up the walls, into the shower, across niches and benches, and onto the ceiling. No transitions, no trim pieces, and no breaks in the look.
Faster Turnaround
Without demolition or tile setting, a shower refresh is typically finished in days rather than weeks. Less time with a torn-up bathroom means far less disruption to your household.
Real Cost Savings
A full microcement makeover of a standard 5x7 bathroom runs roughly $3,000 to $4,000 less than a traditional tile remodel, and a shower-only refresh starts at about $3,000.
Microcement vs. Traditional Tile: Cost and Comparison
Here is how a microcement bathroom compares with a conventional tile remodel for a standard 5x7 bathroom, including the typical prices we see.
| Factor | Traditional Tile Remodel | Microcement |
|---|---|---|
| Full 5x7 bathroom | About $14,000 to $15,000 | About $11,000 |
| Shower-only update | Usually requires demolition and new tile | About $3,000, no demo needed |
| Demolition | Full tear-out down to the backer board or studs | None, applied over existing tile |
| Grout lines | Hundreds of linear feet to clean and reseal | Zero |
| Dust and debris | Heavy, with dumpster and haul-away | Minimal |
| Typical timeline | Two to four weeks | A few days to about a week |
| Ongoing care | Grout scrubbing, staining, and resealing | Wipe clean, periodic topcoat reseal |
Pricing reflects a standard 5x7 bathroom with existing tile in sound condition. Larger rooms, repairs to the existing surface, new fixtures, or plumbing changes affect the final number. We give you a firm written quote after a free in-home assessment. Call 954-743-9707.
Overlay Tile Bathroom Renovation, Done the Right Way
Applying microcement over old tile is what makes it so fast and affordable, but it only lasts when the preparation is done correctly. This is where the difference between an experienced contractor and a weekend applicator shows up.
We start by tapping every tile to find any that are loose or hollow, and we fix those first. Then we deep clean and degrease the surface, apply a bonding primer, and embed a fiberglass reinforcing mesh in the first base coat. That mesh is what keeps the outline of the old grout joints from ever showing through the new finish.
From there we build the surface in several thin layers, sanding between coats, before applying the color finish coats and the protective sealer. Skip any of those steps and you get cracking, peeling, or ghost grout lines a year later. We do not skip them.
How a Microcement Installation Works
Five stages from the first visit to your first shower, most of them completed within a single week.
Free Assessment
We inspect your existing tile and walls, check for moisture or loose tiles, and give you a written quote.
Prep & Prime
Surfaces are repaired, cleaned, degreased, and primed so the coating bonds permanently.
Mesh & Base Coats
A reinforcing mesh is embedded and base layers are troweled on to create a flat, seamless foundation.
Finish Coats
Color layers are applied by hand, giving the surface its soft, natural stone movement.
Seal & Cure
A wet-area sealer locks everything in. After a short cure period, the bathroom is ready to use.
Groutless Shower Remodel: Microcement Showers Built for Florida
Ask any South Florida homeowner what they dislike most about their shower and the answer is almost always the grout. It darkens, it grows mildew in the corners, and no amount of scrubbing brings it back to the color it was on day one. Our humidity makes the problem worse every year.
A microcement shower removes the grout entirely. Walls, floor, built-in bench, and recessed niche are coated as one continuous surface and sealed with a topcoat engineered for constant water exposure. Daily care is a squeegee and a mild pH-neutral cleaner.
For every microcement shower installation in Florida, we use a textured, slip-resistant finish on the floor and coat around linear drains, niches, and benches without a single seam. The shower looks as though it was carved from one piece of stone, and it stays clean far more easily than tile ever did.
Is Microcement Right for Your Bathroom?
Microcement is a great solution for many bathrooms, but not every one. Here is how we decide which approach makes sense.
A Great Fit When
- Your tile is dated but still solid and well bonded
- You want a modern, seamless look without a full remodel
- You are working with a budget or want the job done quickly
- You live in a condo where demolition, noise, and debris are restricted
- You are tired of scrubbing grout and fighting mildew
Better as a Full Remodel When
- There are active leaks or water damage behind the tile
- Large areas of tile are loose, cracked, or hollow
- You want to move the shower, toilet, or walls
- You want natural stone slab or patterned tile as the finish
If your project needs layout changes, see our master bathroom remodeling page or our full range of South Florida bathroom remodeling services. We will tell you honestly which approach fits your bathroom and your budget.
Your Microcement Contractor in Boca Raton
Boca Raton is full of homes and condos built in the 1970s, 80s, and 90s that still have their original bathroom tile. It is usually solid, just badly dated: pastel squares, wide grout lines, and builder-grade finishes that make an otherwise beautiful home feel old. That is exactly the situation microcement was made for.
It is also a strong fit for Boca's condo buildings. Many associations restrict demolition hours, noise, debris removal, and elevator use, which can turn a traditional remodel into a scheduling headache. Because a microcement overlay requires no tear-out, the work is quieter, cleaner, and much simpler to schedule and complete.
We are a licensed general contractor based in Hollywood, and we work throughout Boca Raton and the rest of Palm Beach and Broward counties. Same crew, same standards, and a free in-home assessment wherever you are.
Serving Boca Raton and All of South Florida
We install microcement bathrooms throughout Boca Raton, including ZIP codes 33428, 33431, 33432, 33433, 33434, 33486, 33487, 33496, and 33498, along with surrounding cities in Palm Beach, Broward, and Miami-Dade counties.
Not sure whether we cover your area? Call 954-743-9707 and we will tell you right away.
Closer to Hollywood? Our office is on Polk Street. Visit our page on bathroom remodeling in Hollywood, FL for local details.
Boca Raton Neighborhoods
Nearby Communities
Trusted by South Florida Homeowners
Hands down the best company I have dealt with for any home improvement project. I remodeled my bathroom and I am absolutely thrilled with the job. Punctual, professional, and masters at their work.
Daniel and his team were absolutely fantastic. Communication was excellent, they handled all the permitting and inspections, and they kept us informed every step of the way.
Reliable as always. They got back to me quickly, gave me a fair quote, did great work, cleaned up after themselves, showed up on time, and were polite and helpful throughout.
Microcement Bathroom FAQs
What is a microcement bathroom?
A microcement bathroom is one where the walls, floors, and shower are finished in microcement, a thin cement-based coating about 2 to 3 millimeters thick that is troweled on by hand and sealed. It creates a seamless surface with no grout lines and can be applied directly over existing tile, so the bathroom is transformed without demolition.
Is microcement waterproof in a shower?
Yes, when it is installed as a complete wet-area system. Microcement on its own is a cement-based material. What makes it waterproof is the full system of primer, reinforcing mesh, multiple coats, and a sealer engineered for showers. Applied over a sound surface and properly sealed, the finished shower is waterproof, and water beads on it instead of soaking in.
Can microcement be applied over existing tile?
Yes, and that is one of its biggest advantages. As long as the existing tile is firmly bonded, we apply microcement directly over it after repairing any loose tiles, cleaning, priming, and embedding a reinforcing mesh so the old grout lines never show through. If the tile is failing or there is water damage behind it, we will recommend fixing that first.
How much does a microcement bathroom cost in Boca Raton?
For a standard 5x7 bathroom, a full microcement makeover typically costs about $11,000, compared with roughly $14,000 to $15,000 for a traditional tile remodel. A shower-only microcement refresh starts at about $3,000 with no demolition needed. Larger bathrooms, surface repairs, or new fixtures affect the final price. D&S Contractors Group provides free in-home assessments in Boca Raton and across South Florida at 954-743-9707.
How long does a microcement installation take?
Most shower-only refreshes are completed in a few working days, and a full 5x7 bathroom typically takes about a week. Microcement goes on in several thin layers with drying time between coats, followed by a sealer and a short cure period before the shower is used. Because there is no demolition or tile setting, it is much faster than a traditional remodel.
How durable is microcement?
Properly installed and sealed microcement is a hard, durable surface that holds up to daily use in bathrooms and showers. The key to longevity is the protective topcoat. In heavy-use showers we recommend checking the finish periodically and resealing every few years, which is a quick job compared with regrouting or replacing tile.
Is a microcement shower floor slippery?
It does not have to be. On shower floors and other wet walking surfaces we use a slip-resistant finish and sealer, so you get the seamless look with reliable footing. We can show you sample finishes during your assessment.
How do you clean a microcement bathroom?
Cleaning is simple: a squeegee after showering and a mild pH-neutral cleaner for routine wiping. Avoid bleach, acidic cleaners, and abrasive pads, which can wear down the protective sealer over time. With no grout lines, there is nothing to scrub.
Do I need a permit for a microcement bathroom in Boca Raton?
A cosmetic microcement overlay that does not change plumbing, electrical, or structure generally does not require a building permit, but requirements vary by city and by project. Condo associations often require their own approval before any work begins, and new fixtures or valve changes can trigger a permit. We confirm what applies to your address during the estimate and handle any permits or association paperwork for you.
Ready for a Seamless, Groutless Bathroom?
Get a free in-home assessment from a licensed South Florida contractor. We will check your existing tile, show you finish samples, and give you a firm written price.